Cisco IP Phone 6851

The value of the element attribute encloses within double quotes.Note
The “ua” attribute must have one of the following values:
• na – no access
• ro – read-only
• rw – read/write
Phone Web Server
The web server allows administrators and users to log in to the phone by using a phone web user interface.
Administrators and users have different privileges and see different options for the phone based on their role.
Configure the Web Server from the Phone Screen Interface
Use this procedure to enable the phone web user interface from the phone screen.
Procedure
Step 1
Press Applications .
Step 2
Select Network configuration > Web Server.
Step 3
Select On to enable or Off to disable.
Step 4
Press Set.
Direct Action URL
If the Enable Direct Action URL setting is set to "Yes ", these Direct action URLs are accessible only for the
admin. If Admin user is password protected, the client provides a login prompt before these are accessed. The
Direct Action URLs are accessible via the phone web page via the path /admin/<direct_action>. The
syntax is:
http[s]://<ip_or_hostname>/admin/<direct_action>[?<url>]
For example, http://10.1.1.1/admin/resync?http://server_path/config.xml
The following table provides a list of the different direct avtion URLs that are supported.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
94
Phone Web Server