Cisco IP Phone 6851

DescriptionParameter
Softkeys that display when the phone is off-hook.Off Hook Key List
Softkeys that display when the user must enter dialing data.Dialing Input Key List
Softkeys that display when a call is attempting to connect.Progressing Key List
Softkeys that display when a call is connected.Connected Key List
Softkeys that display when a call transfer has been initiated.Start-Xfer Key List
Softkeys that display when a conference call has been initiated.Start-Conf Key List
Softkeys that display when a conference call is in progress.Conferencing Key List
Softkeys that display when a call is released.Releasing Key List
Softkeys that display when one or more calls are on hold.Hold Key List
Softkeys that display when a call is incoming.Ringing Key List
Softkeys that display when a call is active on a shared line.Shared Active Key List
Softkeys that display when a call is on hold on a shared line.Shared Held Key List
Programmable softkey fields. Enter a string in these fields to configure
softkeys that display on the phone screen. You can create softkeys for
speed dials to numbers or extensions, vertical service activation codes
(* codes), or XML scripts.
PSK 1 through PSK 16
User
Hold Reminder
DescriptionParameter
Specifies the time delay (in seconds), that a ring splash is heard on an
active call when another call was placed on hold.
Default: 0
Hold Reminder Timer
Specifies the volume of the timer ringtone.Hold Reminder Ringtone
Call Forward
DescriptionParameter
Select Yes to enable call forwarding.Cfwd Setting
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
191
Cisco IP Phone Web Page