Cisco IP Phone 6851

DescriptionParameter
Specifies the n extension to be assigned to Line Key n.
Default: n
Extension
Specifies the user name for Line Key.
Default: $USER
Short Name
Specifies whether the incoming call appearance is shared with other
phones or it is private.
Share Call Appearance
Use to assign Busy Lamp Field, Call Pickup, and Speed Dial Functions
to Idle Lines on the IP phone.
Extended Function
Miscellaneous Line Key Settings
DescriptionParameter
Specifies the shared call appearance line ID mapping. If Vertical First
is set, the second call makes the next available line ID LED flash. If
Horizontal first is set, the second call will make the same LED flash on
which the first call is received. Also, the behavior is same for both
outgoing and incoming calls.
Default: Horizontal First
Line ID Mapping
Enables the SCA Barge-In.
Default: No
SCA Barge-In Enable
If enabled, restricts to automatically pick up an incoming call on a shared
line when you take the phone off-hook.
SCA Sticky Auto Line Seize
This parameter allows you to choose the number of calls per line button.
You can choose a value from 2 to 10.
Default: 2
Call Appearances Per Line
Supplementary Services
DescriptionParameter
Enable or disable three-way conference service.
Default: Yes
Conference Serv
Enable or disable attended-call-transfer service.
Default: Yes
Attn Transfer Serv
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
183
Cisco IP Phone Web Page