Cisco IP Phone 6851

DescriptionParameter
DHCP options, delimited by commas, used to retrieve firmware and
profiles.
Default: 66,160,159,150,60,43,125
DHCP Option To Use
DHCP options, delimited by commas, used to retrieve firmware and
profiles.
Default: 17,160,159
DHCPv6 Option To Use
The message sent to the syslog server at the start of a resync attempt.
Default:
$PN $MAC –Requesting % $SCHEME://$SERVIP:$PORT$PATH
Log Request Msg
The syslog message issued upon successful completion of a resync
attempt.
Default:
$PN $MAC -Successful Resync %
$SCHEME://$SERVIP:$PORT$PATH
Log Success Msg
The syslog message that is issued after a failed download attempt.
Default:
$PN $MAC -- Resync failed: $ERR
Log Failure Msg
Allows to select HTTP options. Options are POST and PUT.HTTP Report Method
Specifies the destination for the report of the current internal
configuration that the phone sends to the provisioning server . The URL
in this field can include an encryption key.
•
If the report method is PUT, you can enter the URL for the report
rule in this format:
http://my_http_server/config-mpp.xml
•
If the report method is POST, you can enter the URL for the report
rule in this format:
http://my_http_server/report_upload.php
Report Rule
Allows a user to resync the phone from the phone screen.
Default: Yes
User Configurable Resync
Firmware Upgrade
DescriptionParameter
Allows firmware update operations independent of resync actions.
Default: Yes
Upgrade Enable
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
169
Cisco IP Phone Web Page