Cisco IP Phone 6851

DescriptionParameter
URL where the XML Directory is located.
Default: Blank
XML Directory Service URL
XML service username for authentication purposes
Default: Blank
XML User Name
XML service password for authentication purposes
Default: Blank
XML Password
LDAP
DescriptionParameter
Choose Yes to enable LDAP.
Default: No
LDAP Dir Enable
Enter a free-form text name, such as “Corporate Directory.”
Default: Blank
Corp Dir Name
Enter a fully qualified domain name or IP address of an LDAP server in the following
format:
nnn.nnn.nnn.nnn
Enter the host name of the LDAP server if the MD5 authentication method is used.
Default: Blank
Server
Specify a starting point in the directory tree from which to search. Separate domain
components [dc] with a comma. For example:
dc=cv2bu,dc=com
Default: Blank
Search Base
Enter the distinguished name domain components [dc]; for example:
dc=cv2bu,dc=com
If you are using the default Active Directory schema (Name(cn)->Users->Domain), an
example of the client DN follows:
cn=”David Lee”,dc=users,dc=cv2bu,dc=com
Default: Blank
Client DN
Enter the username for a credentialed user on the LDAP server.
Default: Blank
User Name
Enter the password for the LDAP username.
Default: Blank
Password
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
188
Cisco IP Phone Web Page