Cisco IP Phone 6851

LCD
DescriptionParameter
Select the number of minutes before the back light should turn off (1m,
5m, or 30m) or Always On.
Default: 5m
Back Light Timer (minutes)
Enter a number value from 1 to 15. The higher the number, the greater
the brightness on the IP phone screen.
Default: 10
Brightness
Extension
Extension
In a configuration profile, the Line parameters must be appended with the appropriate numeral to indicate the
line to which the setting applies. For example:
[1] to specify line one
[2] to specify line two
General
DescriptionParameter
To enable this line for service, select yes. Otherwise, select No.
Default: Yes
Line Enable
Share Line Appearance
DescriptionParameter
Indicates whether this extension is to be shared with other Cisco IP
phones or private.
Default: Yes
Share Ext
The user identified assigned to the shared line appearance.
Default: Blank
Shared User ID
Number of seconds before the SIP subscription expires. Before the
subscription expiration, the phone gets NOTIFY messages from the SIP
server on the status of the shared phone extension.
Default: 3600
Subscription Expires
When enabled, the message waiting indicator lights only for messages
on private lines.
Default: No
Restrict MWI
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
194
Cisco IP Phone Web Page