Cisco IP Phone 6851

Example:
<Profile_Rule ua="na">("$EMS" eq "mobile" and "$MUID" ne "" and "$MPWD" ne "")?[--uid
$MUID$PDOM --pwd $MPWD]
http://10.74.121.51:80/dms/CP-8851-3PCC/8851System.xml|http://10.74.121.51:80/dms/CP-8851-3PCC/8851System.xml</Profile_Rule>
b) Set the EM_Enable parameter to Yes.
Example:
<EM_Enable ua="na">Yes</EM_Enable>
c) Enter the enter the domain for the phone, or the authentication server in the EM_User_Domain parameter.
Example:
<EM_User_Domain ua="na">@10.74.121.51</EM_User_Domain>
Step 2
Save the configuration file and upload it to your provisioning server.
Step 3
On the Configuration Utility page, select Admin Login > advanced > Voice > Provisioning.
Step 4
Enter the filepath to the configuration file in one of the Profile Rule fields.
Example:
http://<SERVER IP ADDRESS>:80/dms/td_8861/8861System.xml
Step 5
Click Submit All Changes.
Enable Hoteling on a Phone
Set up the hotel feature on Broadworks and set the phone as a host or a guest.
Procedure
Step 1
On the phone web page, select Admin Login > advanced > Voice > Ext [n] (where [n] is the extension
number).
Step 2
In the Call Feature Settings section, set Enable Broadsoft Hoteling to Yes.
Step 3
Set the amount of time (in seconds) that the user can be signed in as a guest on the phone in Hoteling
Subscription Expires.
Step 4
Click Submit All Changes.
Set the User Password
Users can set their own password on their phones, or you can set a password for them.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
120
Enable Hoteling on a Phone