Cisco IP Phone 6851

Configure a Phone to Accept Pages Automatically
The Single Paging or Intercom feature enables a user to directly contact another user by phone. If the phone
of the person being paged has been configured to accept pages automatically, the phone does not ring. Instead,
a direct connection between the two phones is automatically established when paging is initiated.
Procedure
Step 1
On the Configuration Utility page, select Admin Login > advanced > Voice > User.
Step 2
In the Supplementary Services section, choose Yes for the Auto Answer Page field.
Step 3
Click Submit All Changes.
Server-Configured Paging
You can configure a paging group on a server so that users can page a group of phones. For more details,
refer to your server documentation.
Manage Phones with TR-069
You can use the protocols and standards defined in Technical Report 069 (TR-069) to manage phones. TR-069
explains the common platform for management of all phones and other customer-premises equipment (CPE)
in large-scale deployments. The platform is independent of phone types and manufacturers.
As a bidirectional SOAP/HTTP-based protocol, TR-069 provides the communication between CPEs and Auto
Configuration Servers (ACS).
Procedure
Step 1
On the Configuration Utility page, select Admin Login > advanced > Voice > TR-069.
Step 2
Set up the fields as described in TR-069, on page 205.
Step 3
Click Submit All Changes.
View TR-069 Status
When you enable TR-069 on a user phone, you can view status of TR-069 parameters on the Configuration
page.
Procedure
On the Configuration Utility page, select Admin Login > advanced > Info > Status > TR-069 Status.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
123
Configure a Phone to Accept Pages Automatically