Cisco IP Phone 6851

Procedure
Step 1
On the Configuration Utility page, click Admin Login > advanced > Voice > Phone.
Step 2
Select a Line Key on which to configure speed-dial.
Step 3
From the Extension pulldown menu, select Disabled to disable the extension.
Step 4
In the Extended Function field, enter a string in this format:
fnc=sd;ext=9999@$PROXY;nme=xxxx
If you configure a phone with alphanumeric dialing feature in which the phone can place a call with
alphanumeric characters instead of the traditional digits, you can enter a string in this format:
fnc=sd;ext=xxxx.yyyy@$PROXY;vid=n;nme=xxxx
where:
•
fnc= sd means function=speed dial
•
ext= 9999 is the phone that the line key calls. Replace 9999 with appropriate phone number.
ext= xxxx.yyyy is the phone that the line key calls. Replace xxxx.yyyy with alphanumeric characters.
You can use these characters for alphanumeric dialing: a-z, A-Z, 0-9, -, _, ., and +.
•
vid=n is the line index of the phone.
•
nme= XXXX is the name displayed on the phone for the speed-dial line key. Replace XXXX with a
name.
You can also configure XML service with line key. Enter a string in this format:
fnc=xml;url=http://xml.service.url;nme=name
Step 5
Click Submit All Changes.
Configure a Speed Dial with the Configuration Utility Page
You can configure speed dials on the phone with the web interface.
Procedure
Step 1
On the Configuration Utility page, select Admin Login > Voice > User.
Step 2
In the Speed Dial section, enter a name and number that corresponds to the speed dial entry.
Step 3
Click Submit All Changes.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
109
Configure a Speed Dial with the Configuration Utility Page