Cisco IP Phone 6851

General Purpose Parameters
DescriptionParameter
The general purpose parameters GPP_* are used as free string, registers
when configuring the Cisco IP phones to interact with a particular
provisioning server solution. They can be configured to contain diverse
values, including the following:
•
Encryption keys
•
URLs
•
Multistage provisioning status information
•
Post request templates
•
Parameter name alias maps
•
Partial string values, eventually combined into complete parameter
values
Default: Blank
GPP A - GPP P
Regional
Call Progress Tones
DescriptionParameter
Prompts the user to enter a phone number.Dial Tone
Alternative to the Dial Tone. It prompts the user to enter an external
phone number, as opposed to an internal extension. It is triggered by a,
(comma) character encountered in the dial plan.
Outside Dial Tone
Prompts the user to enter a call forwarding phone number.Prompt Tone
Played when a 486 RSC is received for an outbound call.Busy Tone
Played when an outbound call has failed or after the far end hangs up
during an established call. Reorder Tone is played automatically when
<Dial Tone> or any of its alternatives times out.
Reorder Tone
Played when the phone receiver has been off hook after a period of time.Off Hook Warning Tone
Played during an outbound call when the far end is ringing.Ring Back Tone
Played when a call is waiting.Call Waiting Tone
Brief tone to notify the user that the last input value has been accepted.Confirm Tone
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
172
Cisco IP Phone Web Page