Cisco IP Phone 6851

You can also obtain much of this information, and obtain other related information, remotely through the
phone web page.
Display the Phone Information Window
Procedure
Step 1
Press Applications .
Step 2
Select Status > Product Information.
When a user password is set, a corresponding icon (lock or certificate) displays at the top-right corner of the
phone screen.
Step 3
To exit the Model Information screen, press .
Step 4
To exit the Model Information screen, press Exit.
View the Phone Status
Procedure
Step 1
Press Applications .
Step 2
Select Status > Phone Status > Phone Status.
You can view the following information:
• Elapsed time—Total time elapsed since the last reboot of the system
• Tx (Packets)—Transmitted packets from the phone.
• Rx (Packets)—Received packets from the phone.
View the Status Messages on the Phone
Procedure
Step 1
Press Applications .
Step 2
Select Status > Status messages.
You can view a log of the various phone statuses since provisioning was last done.
Status messages reflect UTC time and are not affected by the timezone settings on the
phone.
Note
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
136
Cisco IP Phone Status