Cisco IP Phone 6851

DescriptionParameter
Displays the file name of the PRT logs.Prt file
Displays the tab Start Packet Capture. Click this tab to initiate capture
packets. Click All to capture all packets that the phone receives or click
Host IP Address to capture packets only when src/dest is the IP address
of the phone.
You can also stop the capture process after initiating it.
Packet Capture
Displays the file that contains the captured packets. Download the file
to see the packet details.
Capture File
Factory Reset
DescriptionParameter
Resets the phone when you click Factory Reset and phone is idle.Factory Reset
Download Status
Firmware Upgrade Status
DescriptionParameter
Displays the upgrade status (failed or succeeded) with reason for the
same.
Firmware Upgrade Status 1
Firmware Upgrade Status 2
Firmware Upgrade Status 3
Provisioning Status
DescriptionParameter
Displays the profile file name of the phone.Provisioning Profile
Displays the provisioning status (resync) of the phone.Provisioning Status 1
Provisioning Status 2
Provisioning Status 3
Displays the reason for the failure of provisioning of the phone.Provisioning Failure Reason
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
147
Cisco IP Phone Web Page