Cisco IP Phone 6851

DescriptionParameter
Specifies whether to authenticate the invite before auto answering a
page.
Default: No
Auth Page
Type of ring heard. Choose from No Ring or 1 through 10.
Ring options are Sunlight, Chirp 1, Chirp 2, Delight, Evolve, Mellow,
Mischief, Reflections, Ringer, Ascent, Are you there, and Chime.
Default Ring
Identifies the Realm part of the Auth that is accepted when the Auth
Page parameter is set to Yes. This parameter accepts alphanumeric
characters.
Auth Page Realm
URL used to join a conference call, generally in the form of the word
conference or user@IPaddress:port.
Conference Bridge URL
Identifies the password used when the Auth Page parameter is set to
Yes. This parameter accepts alphanumeric characters.
Auth Page Password
Identifies the voice mailbox number/ID for the phone.Mailbox ID
Identifies the SpecVM server for the phone, generally the IP address,
and port number of the VM server.
Voice Mail Server
The expiration time, in seconds, of a subscription to a voice mail server.Voice Mail Subscribe Interval
Enables support for basic BroadSoft Automatic Call Distribution (ACD).
The supported values for this option are Yes and No.
Default: No
Broadsoft ACD
Determines the behavior of the phone when a page call arrives.Auto Ans Page On Active Call
Enable/disable the Feature Key synchronization. Applies to DND and
Call Forward All features.
Feature Key Sync
BroadSoft server-only feature. If call park is enabled on the server or
on any of the programmable line keys, you need to enable this field for
call park notification to work.
Default: No
Call Park Monitor Enable
When this parameter is set to yes, the phone sends out subscription
messages (without body) to the server.
Default: No
Enable Broadsoft Hoteling
An expiration value that is added in the subscription message. Default
value is 3600.
Hoteling Subscription Expires
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
198
Cisco IP Phone Web Page