Cisco IP Phone 6851

start=4/1/7;end=10/-1/7;save=1
start=4/1/7/0;end=10/-1/7/0;save=1
The following example configures daylight saving time for Egypt, starting at midnight on the last Sunday in
April and ending at midnight on the last Sunday of September:
start=4/-1/7;end=9/-1/7;save=1 (Egypt)
The following example configures daylight saving time for New Zealand (in version 7.5.1 and higher), starting
at midnight on the first Sunday of October and ending at midnight on the third Sunday of March.
start=10/1/7;end=3/22/7;save=1 (New Zealand)
The following example reflects the new change starting in March. DST starts on the second Sunday in March
and ends on the first Sunday in November:
start=3/8/7/02:0:0;end=11/1/7/02:0:0;save=1
The following example configures the daylight saving time starting on the last Monday (before April 8) and
ending on the first Wednesday (after May 8.)
start=4/-8/1;end=5/8/3;save=1
Select a Display Language on the Phone
Use the Language Selection parameter to select the phone default display language. The value must match
one of the languages that the dictionary server supports. The script (dx value) is as follows:
• <Language_Selection ua =“na”>
•
</Language_Selection>
The Language Selection parameter defaults to blank; the maximum number of characters is 512. For example:
<Language_Selection ua=”na”> Spanish
</Language_Selection>
During startup, the phone checks the selected language and downloads the dictionary from the TFTP/ HTTP
provisioning server that the phone configuration indicates. The dictionaries are available at the support website.
Procedure
Step 1
Press Applications .
Step 2
Select Device administration.
Step 3
Scroll to Language.
Step 4
Select the desired language , then press Set.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
57
Regional Parameters and Supplementary Services