Cisco Nexus 5000 Series - Page 308

Send feedback to nx5000-docfeedback@cisco.com
1-16
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Using Cisco Fabric Services
Default Settings
20:00:00:0e:d7:00:3c:9e 10.76.100.169
Total number of entries = 2
The show cfs peers name command displays all the peers for which a particular application is registered
with CFS. The command output shows all the peers for the physical scope or for each of the valid VSANs
on the switch, depending on the application scope. For physical scope, the switch WWNs for all the peers
are indicated. The local switch is indicated as Local.
switch# show cfs peers name ntp
Scope : Physical
-------------------------------------------------
Switch WWN IP Address
-------------------------------------------------
20:00:00:44:22:00:4a:9e 172.22.92.27 [Local]
20:00:00:05:30:01:1b:c2 172.22.92.215
The following example show cfs peers name command output displays all the application peers (all
switches in which that application is registered). The local switch is indicated as Local.
switch# show cfs peers name port-security
Scope : Logical [VSAN 1]
-----------------------------------------------------------
Domain Switch WWN IP Address
-----------------------------------------------------------
124 20:00:00:44:22:00:4a:9e 172.22.92.27 [Local]
98 20:00:00:05:30:01:1b:c2 172.22.92.215
Total number of entries = 2
Scope : Logical [VSAN 3]
-----------------------------------------------------------
Domain Switch WWN IP Address
-----------------------------------------------------------
224 20:00:00:44:22:00:4a:9e 172.22.92.27 [Local]
151 20:00:00:05:30:01:1b:c2 172.22.92.215
Total number of entries = 2
Default Settings
Table 1-1 lists the default settings for CFS configurations.
Table 1-1 Default CFS Parameters
Parameters Default
CFS distribution on the switch Enabled.
Database changes Implicitly enabled with the first configuration change.
Application distribution Differs based on application.
Commit Explicit configuration is required.
CFS over IP Disabled.