Cisco Nexus 5600 Series - show routing multicast

If the switch is restarted, the syslog server configuration changes that are kept in volatile memory might
get lost.
Note
Before You Begin
You must have configured one or more syslog servers.
Procedure
PurposeCommand or Action
Enters global configuration mode.switch# configure terminal
Step 1
Enables distribution of the syslog server configuration to
network switches using the CFS infrastructure. By default,
distribution is disabled.
switch(config)# logging
distribute
Step 2
Commits the pending changes to the syslog server
configuration for distribution to the switches in the fabric.
switch(config)# logging commit
Step 3
Cancels the pending changes to the syslog server
configuration.
switch(config)# logging abort
Step 4
(Optional)
Disables the distribution of the syslog server configuration
to network switches using the CFS infrastructure. You cannot
switch(config)# no logging
distribute
Step 5
disable distribution when configuration changes are pending.
See the logging commit and logging abort commands. By
default, distribution is disabled.
(Optional)
Displays the pending changes to the syslog server
configuration.
switch# show logging pending
Step 6
(Optional)
Displays the differences from the current syslog server
configuration to the pending changes of the syslog server
configuration.
switch# show logging
pending-diff
Step 7
(Optional)
Displays information about the current state of the syslog
server distribution and the last action taken.
switch# show logging internal
info
Step 8
(Optional)
Copies the running configuration to the startup configuration.
switch# copy running-config
startup-config
Step 9
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
106 OL-31641-01
Configuring System Message Logging
Configuring syslog Server Configuration Distribution