Cisco Nexus 5600 Series - Verifying ACL Logging

Procedure
PurposeCommand or Action
Clears the IP configuration access list cache.switch# clear logging ip access-list cache
Step 1
Verifying ACL Logging
Use one of the following commands to verify the configuration:
PurposeCommand
Displays the ACLLOG status.show logging ip access-list status
Displays the entries in cache and optionally additional
details.
show logging ip access-list cache [detail]
Displays flow counts and rate limitsshow acllog status
Displays the currently active logged flows.show acllog flows
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
OL-31641-01 113
Configuring System Message Logging
Verifying ACL Logging