Cisco Nexus 5600 Series - Licensing Requirements for Soft Reload; Guidelines and Limitations for Soft Reload

DescriptionSeveritySyslog
Soft reload is triggered.ALERTSOFTRELOAD_ATTEMPT_TRIGGERED
Soft reload triggered successfully.ALERTSOFTRELOAD_ATTEMPTED_SUCCESSFUL
Attempt for soft-reload failed.ALERTSOFTRELOAD_ATTEMPTED_FAILURE
Kexec is triggered.ALERTINSTALLER_SOFTRELOAD_BASED_KEXEC
Kexec trigger failed.ALERTINSTALLER_SOFTRELOAD_BASED_KEXEC_FAILED
Soft reload process is initiated.ALERTINSTALLER_SOFTRELOAD_INITIATED
Soft reload aborted due to internal
failure.
ALERTINSTALLER_SOFTRELOAD_ABORTED
Soft reload attempting bootup.ALERTINSTALLER_SOFTRELOAD_BOOTUP_ATTEMPT
Bootup attempt successful post
softreload.
ALERTINSTALLER_SOFTRELOAD_PROCESSING_BOOTUP
Soft reload still in progress, waiting
for login to be enabled.
ALERTINSTALLER_SOFTRELOAD_BOOTUP_IN_PROGRESS
Licensing Requirements for Soft Reload
The following table shows the licensing requirements for this feature:
License RequirementProduct
Soft Reload requires no license. Any feature not
included in a license package is bundled with the
Cisco NX-OS system images and is provided at no
extra charge to you. For a complete explanation of
the Cisco NX-OS licensing scheme, see the License
and Copyright Information for Cisco NX-OS
Software.
Cisco NX-OS
Guidelines and Limitations for Soft Reload
•
A normal switch reload is attempted if a soft reload due to a process crash fails.
•
A soft reload is not triggered when the following scenarios occur:
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
278 OL-31641-01
Soft Reload
Licensing Requirements for Soft Reload