Cisco Nexus 5600 Series - Additional References for Class-Based Quality-Of-Service MIB

second
Use the show policy-map interface control-plane command to display control plane statistics:
switch# show policy-map interface control-plane
Control Plane
service-policy input: copp-system-policy-default
class-map copp-system-class-igmp (match-any)
match protocol igmp
police cir 1024 kbps , bc 65535 bytes
conformed 0 bytes; action: transmit
violated 0 bytes;
class-map copp-system-class-pim-hello (match-any)
match protocol pim
police cir 1024 kbps , bc 4800000 bytes
conformed 0 bytes; action: transmit
violated 0 bytes;
class-map copp-system-class-bridging (match-any)
match protocol bridging
police cir 20000 kbps , bc 4800000 bytes
conformed 0 bytes; action: transmit
violated 0 bytes;
class-map copp-system-class-arp (match-any)
match protocol arp
match protocol nd
police cir 1024 kbps , bc 3600000 bytes
conformed 0 bytes; action: transmit
violated 0 bytes;
class-map copp-system-class-dhcp (match-any)
match protocol dhcp
police cir 1024 kbps , bc 4800000 bytes
conformed 0 bytes; action: transmit
violated 0 bytes;
class-map copp-system-class-wccp (match-any)
match protocol wccp
police cir 1060 kbps , bc 4800000 bytes
conformed 0 bytes; action: transmit
violated 0 bytes;
.
.
.
Additional References for Class-based Quality-of-Service MIB
This section provides additional information related to Class-based Quality-of-Service MIB.
Related Documents
Document TitleRelated Topic
Cisco NX-OS Licensing GuideLicensing
Cisco Nexus 5600 Series NX-OS QoS Command
Reference
Cisco Nexus 5600 Series NX-OS System
Management Command Reference
Command reference
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
330 OL-31641-01
Class-based Quality-of-Service MIB
Additional References for Class-based Quality-of-Service MIB