Cisco Nexus 5600 Series - ip msdp keepalive

The following example shows how to enable NTP logging in order to generate system logs with significant
NTP events:
switch# configure terminal
switch(config)# ntp logging
switch(config)# copy running-config startup-config
[########################################] 100%
switch(config)#
Enabling CFS Distribution for NTP
You can enable CFS distribution for NTP in order to distribute the NTP configuration to other CFS-enabled
devices.
Before You Begin
Make sure that you have enabled CFS distribution for the device.
Procedure
PurposeCommand or Action
Enters global configuration mode.switch# configure terminal
Step 1
Enables or disables the device to receive NTP
configuration updates that are distributed through CFS.
switch(config)# [no] ntp distribute
Step 2
(Optional)
Displays the NTP CFS distribution status.
switch(config)# show ntp status
Step 3
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.
switch(config)# copy running-config
startup-config
Step 4
This example shows how to enable the device to receive NTP configuration updates through CFS:
switch# configure terminal
switch(config)# ntp distribute
switch(config)# copy running-config startup-config
Committing NTP Configuration Changes
When you commit the NTP configuration changes, the effective database is overwritten by the configuration
changes in the pending database and all the devices in the network receive the same configuration.
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
OL-31641-01 229
Configuring NTP
Enabling CFS Distribution for NTP