Cisco Nexus 5600 Series - Where to Go Next

Install operation 25 by user 'admin' at Tue Oct 13 10:28:25 2015
Installer started downloading the package: /n6000-uk9.7.2.1.N1.1.CSCuw28765.bin via bootflash
Install add bootflash:n6000-uk9.7.2.1.N1.1.CSCuw28765.bin
Copying file at Tue Oct 13 10:28:27 2015
Download success, 3321284 bytes received
Verifying package
Checking MD5 at Tue Oct 13 10:28:28 2015
MD5 checksum OK
Checking HW platform at Tue Oct 13 10:28:29 2015
Checking SW platform at Tue Oct 13 10:28:30 2015
Package verified successfully
Sending patch file to plugin manager at Tue Oct 13 10:28:30 2015
Syncing patch to standby Tue Oct 13 10:28:30 2015
Patch sync done to standby Tue Oct 13 10:28:31 2015
The following package is now available to be activated: n6000-uk9.7.2.1.N1.1.CSCuw28765.bin
Install operation 25 completed successfully at Tue Oct 13 10:28:33 2015
----------------------------------------
Install operation 26 by user 'admin' at Tue Oct 13 10:33:24 2015
Install activate n6000-uk9.7.2.1.N1.1.CSCuw28765.bin
Install operation 26 Reload Patch, user confirmation needed at Tue Oct 13 10:33:25 2015
----------------------------------------
Install operation 27 by user 'admin' at Tue Oct 13 10:33:26 2015
Install activate n6000-uk9.7.2.1.N1.1.CSCuw28765.bin
Install activate action started
The software will be activated with system reload
Install operation 27 !!WARNING!! This patch will get activated only after
a reload of the switch. at Tue Oct 13 10:33:31 2015
This example shows the output after an SMU package has been activated but before the switch has been
reloaded:
switch# show install log detail
Install operation 18 by user 'admin' at Sun Mar 9 00:42:10 2014 Install activate
n6000-uk9.7.2.1.N1.1.CSCuw28765.bin Install activate action started The software will be
activated with system reload Install operation 18 !!WARNING!! This patch will get activated
only after a reload of the switch. at Sun Mar 9 00:42:12 2014
This example shows the details of the specific SMUs:
switch# show install package
Boot Images:
Kickstart Image: bootflash:/n6000-uk9-kickstart.7.2.1.N1.0.328.bin
System Image: bootflash:/n6000-uk9.7.2.1.N1.0.328.bin
-----------------------------------------------------------
n6000-uk9.7.2.1.N1.1.CSCuw28765.bin Active
Modules
-----------------------------------------------------------
switch#
Where to Go Next
For information about configuring control policies, see the "Configuring ISG Control Policies" module.
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
OL-31641-01 347
Performing Software Maintenance Upgrades
Where to Go Next