Cisco Nexus 5600 Series - Configuring Contact Information

Step 2
Under Getting Started, follow the directions to register Smart Call Home.
What to Do Next
Configure contact information.
Configuring Contact Information
You must configure the e-mail, phone, and street address information for Smart Call Home. You can optionally
configure the contract ID, customer ID, site ID, and switch priority information.
Procedure
PurposeCommand or Action
Enters global configuration mode.switch# configure terminal
Step 1
Configures the SNMP sysContact.switch(config)# snmp-server
contact sys-contact
Step 2
Enters Smart Call Home configuration mode.switch(config)# callhome
Step 3
Configures the e-mail address for the primary person
responsible for the switch.
switch(config-callhome)#
email-contact email-address
Step 4
The email-address can be up to 255 alphanumeric characters
in an e-mail address format.
You can use any valid e-mail address. The address
cannot contain spaces.
Note
Configures the phone number in international phone number
format for the primary person responsible for the device. The
switch(config-callhome)#
phone-contact
international-phone-number
Step 5
international-phone-number can be up to 17 alphanumeric
characters and must be in international phone number format.
The phone number cannot contain spaces. Use the
plus (+) prefix before the number.
Note
Configures the street address for the primary person
responsible for the switch.
switch(config-callhome)#
streetaddress address
Step 6
The address can be up to 255 alphanumeric characters. Spaces
are accepted.
(Optional)
Configures the contract number for this switch from the
service agreement.
switch(config-callhome)#
contract-id contract-number
Step 7
The contract-number can be up to 255 alphanumeric
characters.
(Optional)
Configures the customer number for this switch from the
service agreement.
switch(config-callhome)#
customer-id customer-number
Step 8
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
126 OL-31641-01
Configuring Smart Call Home
Configuring Contact Information