Cisco Nexus 5600 Series - Enabling CFS to Distribute Smart Call Home Configurations; Enabling CFS to Distribute Device Alias Configurations

The CISCO-CFS-MIB contains SNMP configuration information for any CFS-related functions. See the MIB
reference for your platform.
Enabling CFS to Distribute Smart Call Home Configurations
You can enable CFS to distribute Call Home configurations to all Cisco NX-OS devices in the network. The
entire Call Home configuration is distributed except the device priority and the sysContact names.
Procedure
PurposeCommand or Action
Enters global configuration mode.switch# configure terminal
Step 1
Enters Call Home configuration mode.switch(config)# callhome
Step 2
Enables CFS to distribute Smart Call Home
configuration updates.
switch(config-callhome)# distribute
Step 3
(Optional)
For the specified application, displays the CFS
distribution status.
switch(config-callhome)# show
application-name status
Step 4
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.
switch(config-callhome)# copy
running-config startup-config
Step 5
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# distribute
switch(config-callhome)# show callhome status
Distribution : Enabled
switch(config-callhome)# copy running-config startup-config
Enabling CFS to Distribute Device Alias Configurations
You can enable CFS to distribute device alias configurations in order to consistently administer and maintain
the device alias database across all Cisco NX-OS devices in the fabric.
Before You Begin
Make sure that you are in the storage VDC. To change to the storage VDC, use the switchto vdc fcoe command.
Procedure
PurposeCommand or Action
Enters global configuration mode.switch# configure terminal
Step 1
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
50 OL-31641-01
Using Cisco Fabric Services
Enabling CFS to Distribute Smart Call Home Configurations