Cisco Nexus 5600 Series - Configuration Examples for Soft Reload; Verifying the Soft Reload Status; Additional References for Soft Reload; Feature History for Soft Reload

soft-reload
.
.
.
Configuration Examples for Soft Reload
This section provides configuration examples for Soft Reload.
Enabling the Switch to Perform a Soft Reload After a Process Crash
configure terminal
system soft-reload enable
Performing a Manual Soft Reload
soft-reload
Verifying the Soft Reload Status
PurposeCommand
Displays whether Soft Reload is enabled or disabled.show system soft-reload status
Additional References for Soft Reload
This section describes additional information related to implementing Soft Reload.
Related Documents
Document TitleRelated Topic
Cisco Nexus 5600 Series NX-OS System Management
Command Reference
Command reference
Feature History for Soft Reload
This table lists the release history for this feature.
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
OL-31641-01 281
Soft Reload
Configuration Examples for Soft Reload