Cisco Nexus 5600 Series - Page 24

Where DocumentedReleaseDescriptionFeature
Class-based
Quality-of-Service
MIB
7.3(0)N1(1)Starting with Cisco NX-OS Release
7.3(0)N1(1), the following
cbQoSMIB tables are also supported
by QoS policies:
cbQosClassMapStats,
cbQosMatchStmtStats and
cbQosQueueingStats
Class-based
Quality-of-Service MIB
Phase 2
Performing Software
Maintenance
Upgrades
7.2(1)N1(1)A software maintenance upgrade
(SMU) is a package file that contains
fixes for specific defects. SMUs are
created to respond to immediate
issues and do not include new
features.
Performing Software
Maintenance Upgrades
Class-based
Quality-of-Service
MIB
7.1(1)N1(1)Provides the Simple Network
Management Protocol (SNMP) MIB
that enables retrieval of class-map
and policy-map configuration and
statistics.
Class-based
Quality-of-Service MIB
Configuring GIR
(Cisco NX-OS
Release 7.1(0)N1(1))
7.1(0)N1(1)Provides the ability to gracefully
eject a switch and isolate it from the
network so that debugging or an
upgrade can be performed. The
switch is removed from the regular
switching path and put into a
maintenance mode. Once
maintenance on the switch is
complete, you can bring the switch
into full operational mode.
Isolate and Maintenance
Mode Enhancement
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
2 OL-31641-01
New and Changed Information
New and Changed Information