Cisco Nexus 5600 Series - Page 282

PurposeCommand
Displays the running configuration for a specific
ethernet interface.
show running-config interface ethernet slot/port
Displays information about the OpenFlow agent
connectivity to controller
show openflow openflow-agent switch number
controllers
Displays information about the OpenFlow agent
flows.
show openflow openflow-agent switch number flows
Displays information about the OpenFlow agent port
status.
show openflow openflow-agent switch number ports
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
260 OL-31641-01
Configuring OpenFlow
Verifying OpenFlow