Cisco Nexus 5600 Series - ip mroute

The system-generated and user-generated snapshots are stored in the snapshot repository.
Figure 5: Snapshot Repository
The following table lists the snapshot sections with the corresponding show commands:
Corresponding ‘show’ command
Name of the Section
show bgp sessions vrf allbgp-sessions
show ip eigrp topology summaryeigrp
show ipv6 eigrp topology summaryeigrpv6
show interfaceinterface
show ip ospf vrf allospf
show ipv6 ospfv3 vrf allospfv3
show isis database detail vrf allisis
show ip rip vrf allrip
show ip route summary vrf allroute-summary
show ipv6 route summary vrf allroutev6-summary
show vpcvpc
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
288 OL-31641-01
Configuring GIR (Cisco NX-OS Release 7.3(0)N1(1))
Snapshot