//285212836 is the Policy Map Config Index
CISCO-CLASS-BASED-QOS-MIB::cbQosConfigIndex.285212681.285212682 = Gauge32: 285212833
//285212833 is a Class Map Config Index
CISCO-CLASS-BASED-QOS-MIB::cbQosConfigIndex.285212681.285212683 = Gauge32: 285212834
//285212834 is a Match Statement Config Index
CISCO-CLASS-BASED-QOS-MIB::cbQosConfigIndex.285212681.285212684 = Gauge32: 285212835
//285212835 is a Match Statement Config Index
CISCO-CLASS-BASED-QOS-MIB::cbQosObjectsType.285212681.285212681 = INTEGER: policymap(1)
CISCO-CLASS-BASED-QOS-MIB::cbQosObjectsType.285212681.285212682 = INTEGER: classmap(2)
CISCO-CLASS-BASED-QOS-MIB::cbQosObjectsType.285212681.285212683 = INTEGER: matchStatement(3)
CISCO-CLASS-BASED-QOS-MIB::cbQosObjectsType.285212681.285212684 = INTEGER: matchStatement(3)
CISCO-CLASS-BASED-QOS-MIB::cbQosParentObjectsIndex.285212681.285212681 = Gauge32: 0
CISCO-CLASS-BASED-QOS-MIB::cbQosParentObjectsIndex.285212681.285212682 = Gauge32: 285212681
CISCO-CLASS-BASED-QOS-MIB::cbQosParentObjectsIndex.285212681.285212683 = Gauge32: 285212682
CISCO-CLASS-BASED-QOS-MIB::cbQosParentObjectsIndex.285212681.285212684 = Gauge32: 285212682
Use the snmpwalk command on the Policy Map Table:
$ snmpwalk -v2c -c public A.B.C.D cbQosPolicyMapCfg | grep 285212836
//285212836 is the Policy Map Config Index obtained from the Objects Table
Policy Map Table corresponding to the policy-map configured above
CISCO-CLASS-BASED-QOS-MIB::cbQosPolicyMapName.285212836 = STRING: pmap1 //pmap1 is the
policy map name
CISCO-CLASS-BASED-QOS-MIB::cbQosPolicyMapDesc.285212836 = STRING: policy map 1 //Policy map
description
Use the snmpwalk command on the Class Map Table:
$ snmpwalk -v2c -c public A.B.C.D cbQosClassMapCfg | grep 285212833
//285212833 is the Class Map Config Index obtained from the Objects Table
Class Map Table corresponding to the class-map configured above
CISCO-CLASS-BASED-QOS-MIB::cbQosCMName.285212833 = STRING: cmap1 //class-map on which the
service-policy is configured
CISCO-CLASS-BASED-QOS-MIB::cbQosCMDesc.285212833 = STRING: class map 1 //class-map
description
Use the snmpwalk command on the Match Statement Table:
$ snmpwalk -v2c -c public A.B.C.D cbQosMatchStmtCfg | grep 285212834
Match Stmt Table corresponding to the match statement configured above
CISCO-CLASS-BASED-QOS-MIB::cbQosMatchStmtName.285212834 = STRING: match cos 4
Use the snmpwalk command on the Queuing Config Table:
$ snmpwalk -v2c -c public A.B.C.D cbQosQueueingCfg
Queueing Config Table(QoS only table, taken from default QoS policies)
CISCO-CLASS-BASED-QOS-MIB::cbQosQueueingCfgBandwidth.301990031 = INTEGER: 100
CISCO-CLASS-BASED-QOS-MIB::cbQosQueueingCfgBandwidthUnits.301990031 = INTEGER: percentage(2)
CISCO-CLASS-BASED-QOS-MIB::cbQosQueueingCfgPriorityEnabled.301990031 = INTEGER: false(2)
CISCO-CLASS-BASED-QOS-MIB::cbQosQueueingCfgQLimitUnits.301990031 = INTEGER: 0
CISCO-CLASS-BASED-QOS-MIB::cbQosQueueingCfgAggregateQLimit.301990031 = Gauge32: 0
Use the snmpwalk command on the Set Action Table:
$ snmpwalk -v2c -c public A.B.C.D cbQosSetCfg
Set Action Table (QoS only table) corresponding to the set statement configured above
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
328 OL-31641-01
Class-based Quality-of-Service MIB
Displaying Class-based Quality-of-Service MIB Configuration and Statistics
To Next Page
Loading...
