17
Enter the no shutdown command on all Fabric Extender ST vPC ports.
18
Verify that all vPC switches and the Fabric Extenders on the replacement switch come online and that
there is no disruption in traffic.
19
If you are using the configuration synchronization feature, add the sync-peer configuration to the
switch-profile if this wasn’t enabled in Step 4.
20
If you are using the configuration synchronization feature, enter the show switch-profile name status
command to ensure both switches are synchronized.
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
OL-31641-01 31
Configuring Switch Profiles
Replacing a Cisco Nexus 5000 Series Switch
To Next Page
Loading...
