Getting Started
Using the Access Point Setup Wizard
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 11
1
STEP 18 Click Next. The Wizard displays the Enable Captive Portal - Secure Your Guest
Network window.
STEP 19 Choose a security encryption type for the guest network and enter a security key.
For a description of these options, see System Security.
STEP 20 Click Next. The Wizard displays the Enable Captive Portal - Assign the VLAN ID
window.
STEP 21 Specify a VLAN ID for the guest network. The guest network VLAN ID should be
different from the management VLAN ID.
STEP 22 Click Next. The Wizard displays the Enable Captive Portal - Enable Redirect URL
window.
STEP 23 Select Enable Redirect URL and specify a fully qualified domain name or IP
address in the Redirect URL field (including http://). If specified, guest network
users are redirected to the specified URL after authenticating.
STEP 24 Click Next. The Wizard displays the Summary - Confirm Your Settings window.
STEP 25 Review the settings that you configured. Click Back to reconfigure one or more
settings. If you click Cancel, all settings are returned to the previous or default
values.
STEP 26 If they are correct, click Submit. Your WAP setup settings are saved and a
confirmation window appears.
STEP 27 Click Finish. The Getting Started window appears.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
