98
ENGINE
AUXILIARY EQUIPMENT DRIVE BELT
Engine: XFU
Tools.
[1] Ratchet spanner S.171 FACOM (1/2" square) : S 171
[2] Reduction box S.230 FACOM (1/2" - 3/8" square) : S 230
Remove.
Remove the engine cover.
Pivot the tensioner roller bracket (1) clockwise, until it locks, using tools
[1] and [2] at «a».
Remove the auxiliary equipment drive belt.
ESSENTIAL: Check that the guide rollers are turning freely (no play
and no tightness).
Refit.
Refit the auxiliary equipment drive belt.
Respect the following order of assembly:
- The crankshaft pulley (2).
- The tensioner roller (3).
Release the tensioner roller bracket (1), by turning it anti-clockwise, using
tools [1] and [2].
ESSENTIAL: Make sure that the belt is correctly positioned in the
grooves of the various pulleys.
B1BP27EC
B1BP27FC
C5
Angl.T3-page032-190-2005 4/02/05 15:15 Page 98
To Next Page
Loading...
