CITROEN C5 2005 - Peg for Dynamic Tensioner Roller

97
ENGINE
AUXILIARY EQUIPMENT DRIVE BELT
Engines: RFN - 3FZ
Tool.
[1] Peg for dynamic tensioner roller : (-).0189-E
Removing.
Remove:
- The front RH wheel.
- The front RH splash-shield.
- Detension the auxiliary drive belt by actioning the screw (1).
- Peg the dynamic tensioner roller (2), using tool [1].
Remove the auxiliary drive belt.
ESSENTIAL: Check that the rollers (3) and (4) turn freely (no tight spot).
Refitting.
Refit the auxiliary drive belt.
Check that the auxiliary drive belt is correctly positioned in the grooves of the various pulleys.
Remove tool [1].
Continue the refitting operations in reverse order to removal.
BXXK08DD
BXXK0AUD
C8
Angl.T3-page032-190-2005 4/02/05 15:15 Page 97