95
ENGINE
AUXILIARY EQUIPMENT DRIVE BELT
C5
Engine: 6FZ
Without aircon With aircon
Tool.
[1] Pliers for removing plastic pegs : 7504-T
Remove the belt.
Detension the belt (3) by turning the tensioner roller (1), by the screw (2)
(anti-clockwise).
WARNING: the screw (2) has a left hand thread.
Remove the belt (3), while keeping the tensioner roller (1) tensioned.
Refit the belt.
Compress the tensioner roller (1).
Fit the belt (3).
Release the tensioner roller (1).
Tightening torques (m.daN).
Tensioner roller screw (4) : 2 ± 0,2
Guide roller screw (5) : 3,5 ± 0,3
B1BP23PC B1BP23QC B1BP23PC B1BP23RC
Angl.T3-page032-190-2005 4/02/05 15:15 Page 95
To Next Page
Loading...
