CITROEN C5 2005 - Unlocking the SHIFT LOCK (with an Operating Fault); AM6 “Shift Lock” Gearbox Control Specifications and Precautions

254
CLUTCH
GEARBOX
TRANSMISSION
AM6 “SHIFT LOCK” GEARBOX CONTROL SPECIFICATIONS AND PRECAUTIONS
Engine: XFU
SHIFT LOCK.
NOTE: The «shift lock» is a system that locks the gear selection lever in position «P».
Unlocking the «SHIFT LOCK» (normal operation).
Switch on the ignition.
Press the brake pedal and keep it pressed.
Move the gear selection lever out of position «P».
Unlocking the «SHIFT LOCK» (with an operating fault).
Should it be impossible to unlock the «shift lock» with the «Normal operation» method, the fault
may originate from one of the following components:
- «Shift lock».
- Gear lever position switch.
- Automatic gearbox ECU.
- Electrical harnesses.
- Battery voltage.
Remove:
- The gear lever knob (1) (pull upwards).
- The cover (2) (unclip).
- The grid (3).
- Unlock the «shift lock» (4) with the aid of a screwdriver.
- Move the gear selection lever out of position «P».
C5FP0CUD
C5
C5FP0CTC
Angl.T3-page207-255-2005. 4/02/05 15:19 Page 254