79
ENGINE
SPECIAL FEATURES: TIGHTENING TORQUES (m.daN)
Engine: 4HX
Cylinder block
Camshaft bearing cap cover
Tightening 1 ± 0,1
Pre-tightening the 28 screws Ø 6 6 ± 0,5
Tightening the 28 screws Ø 6 1 ± 0,1
Exhaust manifold
Pre-tightening the 8 nuts 1,5 ± 0,1
Tightening the 8 nuts 0,3 ± 0,3
Valve cover
Pre-tightening the 13 screws 0,5 ± 0,15
Tightening the 13 screws 9 ± 0,1
Camshaft pulley hub 4,3 ± 0,4
Pulley on hub 2 ± 0,2
Flywheel - Clutch
Flywheel
Pre-tightening 1,5 ± 0,1
Tightening 4,7 ± 0,4
Clutch mechanism 2 ± 0,2
C5
Angl.T3-page032-190-2005 4/02/05 15:15 Page 79
To Next Page
Loading...
