253
CLUTCH
GEARBOX
TRANSMISSION
AM6 GEARBOX: CONTROL SPECIFICATIONS
Engine: XFU
The gear selector is guided by the shape of the stepped gate and by a retaining spring
which pulls it to the left hand side.
The 2 switches placed on the gear control gate permit the driver to choose one of the
following three driving programmes:
- Normal programme: Operates as the default programme (eco law, autoadaptive mode).
- Sport programme (a): Permits a more dynamic, sporty performance.
- Snow programme (b): Facilitates starting and adhesion on slippery surfaces.
NOTE: To return to the normal programme, press a second time on the sport switch
or snow switch.
Gearbox end.
The automatic gearbox is controlled by a cable.
«c» Push-button in pushed-in position
(1) Sleeve stop
(2) Control lever with ball-joint
(3) Automatic adjustment
Automatic adjustment:
- Pull out button «c» to adjust the control.
- Push in button «c» to lock the adjustment of the control.
B2CP3DKD
B2CP3WVC
C5
Angl.T3-page207-255-2005. 4/02/05 15:19 Page 253
To Next Page
Loading...
