CITROEN C5 2005 - Flywheel Setting Peg

153
ENGINE
CHECKING THE VALVE TIMING
Engine: 9HZ
B1BP32CC
C5
Tools.
[1] Flywheel setting peg : (-).0194.C
[2] Camshaft setting peg : (-).0194.B
[3] Crankshaft setting peg : (-).0194.A
Removing.
IMPERATIVE: Respect the safety and cleanliness requirements specific to High pressure
Diesel injection (HDi) engine versions.
Raise and support the vehicle, wheels hanging.
Disconnect the positive and negative terminals of the battery.
Remove:
- The front RH wheel
- The front RH splash-shield.
- The auxiliary drive belt (see corresponding operation).
Uncouple:
- The fuel supply unions (1).
- The air/air heat exchanger inlet and outlet pipes (2).
- The exhaust line (at the flexible pipe).
Angl.T3-page032-190-2005 4/02/05 15:15 Page 153