52
ENGINE
SPECIAL FEATURES: TIGHTENING TORQUES (m.daN)
Engine: XFW
Lubrication circuit
Oil sumpLubrication circuit.
(22) Oil separator : 0,8
(23) Strainer : 0,8
(24) Induction pipe : 0,8
(25) Drain plug : 3 ± 0,3
(26) Oil filter sleeve (with coolant/oil exchanger) : 0,5
Oil filter : 0,2
Stage 1: Do up bolts 13,15 and 17.
Stage 2: Tighten bolts 13,15 and 17 to : 0,2.
Stage 3: Do up the 17 remaining bolts.
Stage 4: Tighten the remaining bolts to : 0,5.
Stage 5: Tighten all the bolts : 0,8.
Stage 6: Repeat the tightening a few times in the same order to obtain a
tightening torque of 0,8 m.daN on all the bolts.
B1BK24WD B1BK24XD
Respect the sequence of stages and the order of tightening
C8
Angl.T3-page032-190-2005 4/02/05 15:15 Page 52
To Next Page
Loading...
