314
HYDRAULICS
C4CP0SDC
DRAINING - FILLING - BLEEDING: HYDRAULIC SUSPENSION/STEERING CIRCUIT
Tools.
[1] Pliers for CLIC clips : 4121-T
[2] LEXIA station : 4171-T
[3] PROXIA station : 4165-T
Identification.
Sequential control suspension switch.
A: Suspension Hydractive 3
B: Suspension Hydractive 3 +
Draining.
IMPERATIVE: Any LDS fluid that is collected must not be re-used.
Start the engine.
Place the suspension height control in the "LOW" position.
Stop the engine.
Raise and support the vehicle, wheels hanging.
WARNING: The LDS fluid reservoir is pressurised.
Open the cap of the LDS fluid reservoir.
Remove:
- The front RH wheel.
- The front RH splash-shield.
Release the clip (1), using tool [1].
Disengage the hose (2) from the LDS fluid reservoir.
Drain the LDS fluid reservoir.
C5
B4BP01ED
Angl.T3-page300-321-2005 4/02/05 15:33 Page 314
To Next Page
Loading...
