CITROEN C5 2005 - Сhecking the Valve Timing; Camshaft;Crankshaft Setting Peg; Checking the Setting of the Timing

110
ENGINE
CHECKING THE VALVE TIMING
Engine: 6FZ
B1BP27JC
B1BP25PC
Tools.
[1] Camshaft setting peg : (-).0189.A
[2] Crankshaft setting peg : (-).0189.B
Checking the setting of the timing.
Removing.
Disconnect the battery negative terminal.
Raise and support the vehicle, front wheels hanging.
Remove the front RH wheel, the splash-shield and the upper timing cover.
Turn the engine by means of the crankshaft pinion screw (1), clockwise, to bring it to the pegging position.
Peg the crankshaft, using tool [2].
Peg the camshaft pulleys, using tool [1].
NOTE: The peg [1] should go in without effort.
WARNING: If the pegs go in only with difficulty, repeat the operation for fitting and tensioning the timing
belt (see corresponding operation).
Refitting.
Remove the pegs [1] and [2].
Refit the upper timing cover, the splash-shield, the plastic pins and the front RH wheel.
C5
Angl.T3-page032-190-2005 4/02/05 15:15 Page 110