CITROEN C5 2005 - Screws M7 X100-20 (X8);M9 X100-45 (X4);M8 X125-60 (X8)

82
ENGINE
SPECIAL FEATURES: TIGHTENING TORQUES (m.daN)
Engine: 4HW
Crankshaft (continued)
(8) Screws M7x100-20 (x8) (*) (screw by screw
and part stage)
Stage 1: Tightening 1
Stage 2: Slackening 180°
Stage 3: Tightening 2,3 ± 0,2
Stage 4: Angular tightening 46°
(9) Screws M9x100-45 (x4) (*) 1 ±
(10) Screws M8x125-60 (x8) (***)
Pre-tightening 0,5
Tightening 1 ± 0,1
Angular tightening 60°
C8
B1BK3EMD
(*) = Re-use prohibited.
(**) = Tighten in a spiral, commencing from the inside.
(***) = Tighten in the order indicated 1 to 8.
Angl.T3-page032-190-2005 4/02/05 15:15 Page 82