AXLES
SUSPENSION
STEERING
261
AXLE GEOMETRY: CHECKING AND ADJUSTING VEHICLE HEIGHT
Measuring of heights.
Measuring the wheel radius.
To determine the centre of the wheel, place tool [1] on the heads of the wheel bolts.
Meaure the radius R1 using tool [2] (distance from ground to centre of wheel).
Measuring the front height H1M.
The front height H1M is measured between the ground and the subframe, to the rear of the front
fixing yokes of the suspension tripod.
Calculating the front height H1C.
Compare:
- The value measured H1M.
- The value calculated H1C.
- Adjust the front height if necessary.
B3CP06AC
B3CP06BC
C5
All types except CARLSSON
CARLSSON
H1C = R1 - 140 mm
R1 = Radius of front wheel (mm)
H1C = R1 - 155 mm
R1 = Radius of front wheel (mm)
Angl. T3-page256-281-2005 4/02/05 15:25 Page 261
To Next Page
Loading...
