CITROEN C5 2005 - Measurement of Heights

317
HYDRAULICS
B3CP06BC
DRAINING - FILLING - BLEEDING: HYDRAULIC SUSPENSION/STEERING CIRCUIT
Measurement of heights.
Measuring the wheel radius.
To determine the centre of the wheel, place the tool [1] on the heads of the wheel bolts.
Meaure the radius R1 with the tool [2] (distance between the ground and the centre of the wheel).
Measuring the front height H1M.
The front height H1M is measured between the ground and the subframe, at the rear of the front fixing
yokes of the suspension triangle.
Calculating the front height H1C.
Except CARLSSON : H1C = R1 - 140 mm.
CARLSSON : H1C = R1 - 155 mm.
R1 = Radius of front wheel (mm).
Compare:
- The value measured H1M.
- The value calculated H1C.
Adjust the front height if necessary.
C5
B3CP06AC
Angl.T3-page300-321-2005 4/02/05 15:33 Page 317