CITROEN C5 2005 - Double Flywheel Setting Peg; Kit of Plugs

164
ENGINE
CHECKING THE VALVE TIMING
Engines: RHL - RHR
Tools.
[1] Kit of plugs : (-).0188.T
[2] Double flywheel setting peg : (-).0188.X
[3] Camshaft setting peg : (-).0188.M
IMPERATIVE: Respect the safety and cleanliness requirements specific to High pressure Diesel injection
(HDi) engine versions
Remove the engine cover and the battery.
Disconnect the negative terminal of the battery.
Raise and support the front of the vehicle.
Remove the under-engine sound-deadening and the front RH splash-shield (see corresponding operation).
Uncouple, plug and move aside, using tool [1], the fuel supply (1) and fuel return (2) pipes.
Suspend the engine, using a workshop hoist.
Remove the torque reaction rod (3) and the RH engine support (4).
Move aside the electrical harness (5).
Remove:
- The camshaft position sensor.
- The inlet cylinder head cover (6).
- The upper timing cover screws.
- The upper timing cover (6).
B1EP1FMC
B1BP31DC
C5
Angl.T3-page032-190-2005 4/02/05 15:15 Page 164