310
HYDRAULICS
B4BP01KD
B4DP003D
HYDRAULIC SPECIFICATIONS
Hydractive 3 + regulator
(39) Electrovalve
(40) Hydractive regulator
(41) «Slimline» suspension sphere
(42) Depressurisation screw
Hydraulic unions
Reference
Tube diameter Tightening torque
(mm) m.daN
G 3,5
1,5 ± 0,3
H 6,35
J 10 2,5 ± 0,5
IMPERATIVE: At each operation, it is necessary to change the hydraulic seals.
WARNING: Each time you remove a hydraulic union, reference G: Remove the O-ring seal from its housing.
C5 + CARLSON
Angl.T3-page300-321-2005 4/02/05 15:33 Page 310
To Next Page
Loading...
