CITROEN C5 2005 - Plug CHC M12 X150-16 (X 1);M15 X150 (X 2); Screws M7 X100-40 (X 2);M7 X100-20 (X 4);M12 X150-81 (X10)

81
ENGINE
SPECIAL FEATURES: TIGHTENING TORQUES (m.daN)
Engine: 4HW
Crankshaft
(1) Pulley screw M14x150-70
Pre-tightening 7 ± 0,5
Angular tightening 82°
(2) Screws M7x100-40 (x 2) (*)
Pre-tightening 0,7 ± 0,1
Tightening 1,5 ± 0,1
(3) Screws M7x100-20 (x 4)
Pre-tightening 0,7 ± 0,1
Tightening 1,5 ± 0,1
(4) Plug CHC M12x150-16 (x 1) 2,5 ± 0,2
(5) Plugs M15x150 (x 2) 4 ± 0,4
(6) Screws M9x100-24 (+loctite FRENETANCH) (x8)
Pre-tightening 1,5 ± 0,1
Tightening 5 ± 0,5
(7) Screws M12x150-81 (x10) (**)
Pre-tightening 1 ± 0,1
Tightening 2,5 ± 0,2
Angular tightening 60°
C8
B1BK3EMD
(*) = Re-use prohibited.
(**) = Tighten in a spiral commencing from the inside.
Angl.T3-page032-190-2005 4/02/05 15:15 Page 81