80
ENGINE
SPECIAL FEATURES: TIGHTENING TORQUES (m.daN)
Engine: 4HX
Lubrication circuit
Oil pump
Pre-tightening 0,7
Tightening 0,9 ± 0,1
Oil/coolant heat exchanger 5,8 ± 0,5
Turbocharger lubrication tube
Engine end 3 ± 0,3
Turbocharger end 2 ± 0,2
Diesel injection circuit
Diesel injector
Do up the 2 nuts By hand
Tightening 4 ± 0,3
Angular tightening 45° ± 5°
Union on injection rail 2 ± 0,2
Injection pump on support 2,25 ± 0,3
Union on diesel injector 2 ± 0,2
Injection pump pulley 5 ± 0,5
Union on injection pump 2 ± 0,2
Cooling circuit
Coolant pump 1,6 ± 0,3
Coolant inlet housing 2 ± 0,2
C5
Angl.T3-page032-190-2005 4/02/05 15:15 Page 80
To Next Page
Loading...
