101
ENGINE
C5AUXILIARY EQUIPMENT DRIVE BELT
Engine: 9HZ
With aircon
B1BP2ZCD
Refitting.
WARNING: Belt to be re-used, mark the direction of fitting of the belt.
Refit the auxiliaries drive belt.
Compress the tensioner roller (1) by acting at «c» (clockwise), using tool [1].
Remove tool [2].
IMPERATIVE: Make sure that the auxiliaries drive belt is correctly positioned in
the grooves of the various pulleys.
Refit:
- the front RH wheel, the sound-deadening under the engine.
- Reconnect the battery.
IMPERATIVE: Carry out the operations that are necessary following a reconnection
of the battery (see corresponding operation).
Angl.T3-page032-190-2005 4/02/05 15:15 Page 101
To Next Page
Loading...
