130
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine: RFN
Refitting (continued).
Refit:
- The upper timing cover.
- The torque reaction rod (3).
- The screw (1), tighten to 4,5 m.daN.
- The screw (2), tighten to 4,5 m.daN.
- Continue the refitting operations in reverse order to removal.
- Refit the auxiliary drive belt (see corresponding operation).
B1EK1T7D
C8
Angl.T3-page032-190-2005 4/02/05 15:15 Page 130
To Next Page
Loading...
