140
ENGINE
CHECKING THE VALVE TIMING
Engine: XFU
Checking the valve timing (continued).
Peg the crankshaft, using tool [1].
Check that the tool [2] engages without effort in the cylinder heads at the camshaft pulleys.
Remove the tools [1] and [2].
Refit:
- The lower timing cover (13).
- The upper timing covers (9) and (10).
- The crankshaft pulley (12).
- The roller/dynamic tensioner assembly (11).
- The power steering pulley.
Complete the refitting of components.
Initialise the ignition injection ECU.
B1EP15UD
B1EP08TC
C5
Angl.T3-page032-190-2005 4/02/05 15:15 Page 140
To Next Page
Loading...
